Maxii
Copper
Ethernet and 60W PoE Extended UTP Transmitter

Vi2701TX

Features

  • Provides Ethernet data and PoE power up to 60W at extended distances
  • It extends Ethernet and PoE up to 3,000 feet (914m) of UTP cables
  • Up to 74W can be provided from the Vi2701RX or the Vi2500 series to the Vi2701TX
  • Provides IEEE 802.3af,at, UPoE PoE up to 60W
  • Meets the increasing requirements for high power PoE fixed and domes cameras
  • MegaPixel Certified (MPC™) high data rate, for virtual loss free transmission of cameras requiring Jumbo Frame transmission
  • Symmetric Bandwidth (SBW™) provides consistent upload and download with Virtual Zero Packet Loss (VZPL™) over total specified distance
  • Type tested to RFC 2544 TCP/IP network bandwidth packet transmission standards and Jumbo Frame Transmission
  • Wide operating temperature of -20°C to +75°C
  • Compliant to IEEE 802.3af/at and can drive loads with one PD or 2 PD remote PoE loads

Overview

Vigitron’s MaxiiCopper™ Vi2701TX remote unit is designed to meet the growing need for Ethernet and PoE transmission of high power cameras and other PoE powered devices. It is able to receive up to 74W PoE power beyond Ethernet standard distances and eliminate the need for expensive remote-site power supplies, significantly lowering system installation and operating costs. The Vi2701TX supports both single PD or dual PD PoE cameras. It is compatible with Vigitron's Vi2701RX and Vi2500 series extended UTP midspans.

The Vi2701TX includes unique features that assure high performance required to support the largest Megapixel cameras. The Vi2701TX’s Symmetric Bandwidth (SBW™) assures full bandwidth transmission is maintained over the entire operational range for both uploads and downloads with Virtual Zero Packet Loss (VZPL™). The MaxiiCopper™ Vi2701TX can easily fit inside most camera housings and junction boxes. It is MegaPixel Certified (MPC™), type tested to network packet performance standards, along with major Camera manufacturer compatibility testing to guarantee error-free and quality operation.

Installation cost savings, tested and proven performance, and major camera manufacturer compatibility all go into making Vigitron’s  MaxiiCopper™ Vi2701TX, a great choice for extended distance data and PoE power transmission.

Specification

Electrical
Ethernet InterfaceStandard 10/100BaseT
Ethernet Rate10/100 Mb/s, Auto selectable
Full speed / full duplex at maximum rated distance
UTP**100 Ohm +/- 20%, 3,000 feet (914 m) at 10BaseT
2,100 feet (640 m) at 100BaseT
Power InputIEEE 802.3af,at, UPoE up to 74W
PoE Output56V, @ 60W max
Status LEDsPower
Standard Ethernet: Traffic, Link
Extended Ethernet: Traffic, 10/100BaseT
ConnectorsEthernet Interface: RJ-45 Connector
Extended Interface: RJ-45 Connector
Output Power: 2-pin Pluggable Terminal Block
RFC2544 TCP/IP Packet Transmission
768 UDP, 2068 HTTP, 793 TCP
791 IP, 1783 TFTP, 894 IP over Ethernet
Compatible withIEEE 802.3af PoE, IEEE 802.3at PoE, UPoE
Regulatory
SafetyCE, UL, cUL
EnvironmentalRoHS
Environmental
Humidity0 to 95%, non-condensing
Temperature Operating: -20°C to +75°C
Storage: -40°C to +80°C
Mechanical
Dimensions1.4 x 2.15 x 4.15 in, 3.5 x 4.3 x 10.4 cm (HxWxL)
Weight0.37 lb (167 g)
MaterialAluminum
*Specifications subject to change without notice.
**Distances are based on indicated power at the PD input and are obtained using Cat-5e cable, 56V power supply. Factors such as cabling, connections and environmental conditions may affect actual distances and should be taken into consideration.

Downloads

Vi2701TX Data Sheet
Vi2701TX User Manual
Vi2701TX A&E Specification
Vi2701TX Application Drawing
Vi2701TX Product Drawing

Ordering Information

Vi2701TX Ethernet and 60W PoE Extender (Transmitter)

© Copyright 2022 - Vigitron Inc. - All Rights Reserved
magnifiercross-circle linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram