Vi00026

Features

Requests maximum IEEE 802.3at PoE power from PoE source
Maintains IEEE 802.3 PoE protection features
Establishes handshaking from PoE
Eliminates PoE shut down due to insufficient PoE power level request especially at extended distances
Assures that reliable PoE is provided to the connected device

Overview

The Vi00026 requests maximum IEEE 802.3at PoE power from the PoE source regardless of the PoE load power level.

There are many reasons that IP/PoE CCTV applications may require more power than the end PoE device. This can be due to higher wire resistance, start-up power surge, or features such as day/night and LED startup. Also when using Ethernet extenders the total required PoE power will be higher than the camera power requirement. The Vi00026 eliminates the possibility of power mismatch between the camera PoE power level and the total PoE power requirements for the whole link and avoids camera shutdowns due to insufficient PoE power.

Vigitron’s Vi00026 PoE power class changer takes the guesswork out of all these potential problems. Using a built-in PD and PSE, the Vi00026 helps to bridge the power requirement differences assuring more reliable connections.

Specification

Electrical
Ethernet Standards	IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3af, IEEE 802.3at, IEEE 802.3z
PoE Output Power	802.3af/802.3at, up to 30W
Connectors	Ethernet and PoE Input: RJ-45 Ethernet and PoE Output: RJ-45
Status LED	PoE input LED (on/off) PoE output LED (on/off)
Power Supply	Uses PoE, no power supply required
Regulatory
CE, WEEE, RoHS
Environmental
Humidity	0% to 95%, non-condensing
Temperature	Operating: -20°C to +75°C Storage: -40°C to +85°C
Mechanical
Dimensions	0.9x1x2.7 in., 2.3x2.5x6.9 cm (HxWxL)
Weight	0.01 lbs (107g)
Housing Material	Extruded Aluminum
*Specifications subject to change without notice.