Maxii
Net
36-Port L2+/L3 Lite Managed Fiber/Copper Core Network Switch

Vi35136

Features

  • Hybrid Ethernet Copper and Fiber connections.
  • (8) 10/100/1000Mbps RJ45 Copper ports.
  • (24) 100/10000Mbps Fiber SFP Ports.
  • (4) 1G/2.5G/10G SFP uplink ports.
  • 36 independent ports.
  • Dual AC power input for built in back up.
  • Full Layer 2+ and Layer 3 lite static routing.
  • Jumbo Frame handling up to 10,240 bytes, even at 100Mbps.
  • G.8032 V1/V2 standard ring protocol.
  • Wide band 144Gbps switch fabric.
  • Thermal protection port temperature settings.
  • Individual port +/-8kV contact discharge and +/-15KV air discharge.
  • Uses MSA compliant standard SFP to any fiber configuration.
  • Easy to use GUI for set-up and operations.
  • Port security with limit control configuration.

Overview

Vigitron’s Vi35136 is a next-generation enterprise-level fiber switch providing 24 MSA-compliant fiber ports with 4 combination fiber/copper ports. Focusing on the network and port security, Layer 2+ provides all of the features required for Vigitron’s Vi35136 is a next-generation enterprise-level hybrid copper and fiber core switch providing 24 MSA compliant fiber ports, 8 ports of10/100/1000Mbps UTP copper, and 4 ports of fiber 1G/2.5G/10G. Individual copper ports have built-in surge protection. Focusing on the network and port security, Layer 2+ provides all of the features required for network operation while each port is programmed with an individual MAC address, allowing for secured Layer 3 signal routing without any exposure to outside unsecured access. Jumbo frames can be programmed at 100Mbps for direct connection to the cameras and most IP security devices, reducing the potential for data loss while providing the ability to handle the largest megapixel cameras. Each port can be configured for individual and different subnet VLANs. The system Syslog provides detailed performance data. The Vi35136 is the perfect hybrid UTP/Fiber core switch solution for connecting up to 24 fiber network cables to a single location.

The Vi35136 is designed to meet the growing requirements for higher bandwidth for IP security cameras by providing reliability and connectivity with the ability to locate and identify network system problems:

  • Layer 3 lite operations for operations across different subnets while maintaining network security
  • Programmable video/data packet transmission up to the Jumbo Frame limit of 10240 bytes for transmitting the highest megapixel cameras at 100Mbps, 1, 2.5G, and 10G port speeds
  • Wide 144 Gbps switch fabric assuring all required bandwidth, even with all ports at their maximum bandwidth assuring video and data quality
  • Dual AC power input for lossless backup
  • Programmable G.8032 standard ring protocol
  • Programmable multicasting for compatibility and performance with the largest IP video network systems
  • Programmable Rapid Spanning Tree for redundant network configuration assuring maintenance of network communication using multiple paths
  • Ability to use ICMP, TCP, and UDP packet transmission to test network connectivity through multiple hops
  • Automatic MAC address detection for connected devices for easy connection verification and security hops
  • Complete SFP read-out for units containing DDMI capacity

Specification

Electrical
Ethernet Interface8 x RJ45 ports at 10/100/1000Mbps
24 x Fiber MSA ports at 10/100/1000Mbps
4 x Fiber MSA Uplink ports at 1/2.5/10Gbps
Throughput107.14Mbps
Power Input2 x 100-240VAC 50~60Hz at 2A
Status LEDSPower, Traffic, Link, and Sys
Switch Fabric144Gbps
MAC TableUp to 32K MAC addresses
Jumbo Frames10,240 Bytes
Regulatory
EmissionFCC Part 15, Class 15B
SafetyCE-EMC,Compliance with Directive 2014/30/EU
EnvironmentalRoHS, Directive 2011/65/EU
Annex(EU) 2015/863 and amending Annex
WEEE
Surge ProtectionIEC61000-4-2(ESD): ±8kV contact discharge, ±15kV air discharge IEC61000-4-5(Lightning protection/Surge): Power:CM±4kV/DM±2kV; Port: ±6kV
Protection LevelIP30
Environmental
Humidity0 to 95%, non-condensing
Operating: 10% to 90%, relative, non-condensing
Temperature Operating: 0°C to +40°C
Storage: -40°C to +85°C
Mechanical
Dimensions17.38x1.75x11.4 in, 44.2x4.5x29cm (HxWxL)
Weight9.7lb (4.4Kg)
HousingSheet Metal
Accessories
• 2 x Molded IEC 7 ft. (200 cm) Power Cord
• Mounting Kit
• Console Cable
• USB Memory Stick: Operations Manual, Datasheet
Minimum Requirements
• Web Browser: Mozilla Firefox v2.5 or later, Microsoft Internet Explorer v6 or later
• Category 5/6 Ethernet network cable
• TCP/IP, network adapter, and network operating system (such as Microsoft Windows or Linux) installed on each computer in the network
• MSA Compliant SFPs
*Specifications subject to change without notice.

Downloads

Vi35136 Data Sheet
Vi35136 User Manual
Vi35136 A&E Specification
Vi35136 Application Drawing
Vi35136 Product Drawing

Ordering Information

Vi35136 36-Port L2+/L3 Lite Managed Fiber/Copper Core Network Switch C69

© Copyright 2022 - Vigitron Inc. - All Rights Reserved
magnifiercross-circle linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram