Overview
Vigitron’s Vi35024 is a next-generation enterprise-level fiber switch providing 24 MSA complaint fiber ports with 4 combination fiber/copper ports. Focusing on the network and port security, Layer 2+ provides all of the features required for network operation while each port is programmed with an individual MAC address, allowing for secured Layer 3 signal routing without any exposure to outside unsecured access. Jumbo frames can be programmed at 100Mbps for direct connection to the cameras and most IP security devices, reducing the potential for data loss while providing the ability to handle the largest megapixel cameras. Each port can be configured for individual and different subnet VLANs. The system Syslog provides detailed performance and immediately reports potential problem areas while the Vi35024 route tracing can be used during set-up and operations to determine the network connectivity status. The Vi35024 is the perfect core switch solution for connecting up to 24 networks to a single location.
The Vi35024 is designed to meet the growing power and bandwidth requirements for IP security cameras by providing both reliability and conductivity with the ability to locate and determine network system problems:
- Layer 3 lite capability for operations across different subnets while maintaining network security
- Programmable video/data packet transmission up to the Jumbo Frame limit of 9600 bytes for transmitting the highest megapixel cameras at 100Mbps and 1Gps port speeds
- High 48Gbps switch fabric assures all required bandwidth, even with all ports at their maximum bandwidth assuring video and data quality
- Redundant 48V power supply back-up
- Able to operate on DC power from IEEE 802.3at PoE sources
- Programmable multicasting for compatibility and performance with the largest IP video network systems
- Programmable Rapid Spanning Tree for redundant network configuration assuring maintenance of network communication not using multiple paths
- Able to use ICMP, TCP, and UDP packet transmission to test network connectivity through multiple hops
- Automatic MAC address detection for connected devices for easy connection verification and security hops
- Complete SFP readout for units containing DDMI capacity
- High operating temperature up to 60°C provides the ability to be installed in locations where normal switches would not operate.