16-Channel Powered VPD Combiner with UTP Receiver

Vi1516VPD

Features

Supports up to 16 cameras by providing video, class II power and data on a single Category-5 cable per camera for up to 750 ft. (228 m)
Built-in passive transceivers with surge protection
16 isolated camera power individually selectable 24 or 28 VAC at 1 A max per channel, 12 A aggregated
A glass fuse per channel, accessible from front panel
Use with the Vi1053VPD transceiver at the camera
Power present and fault indicator LEDs for each camera
60 dB cross talk and noise suppression on video signals
1U high wall or rack mountable
Designed for structured wiring applications
Limited lifetime warranty

Overview

The Vi1516VPD is a passive transceiver device that also combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. It supports up to 16 cameras for up to 750 ft. (228 m) and is designed to be installed in the control room. The Vi1516VPD has a built-in 16-channel fully isolated class II 28/24 VAC power supply. Each camera
power output is equipped with a 2 A glass fuse accessible from the front panel for extra protection.

At the camera end, the Vi1053VPD video balun/combiner provides video, power, and data on separate outputs. The video connections are
through 16 BNC connectors and to the DVR or matrix switches. The data connections to the DVR are through 4-pair RJ-45 cables. There
is a separate data connection for each camera. All equipment follows industry-standard EIA/TIA 568B pinouts. The Vi1516VPD is an ideal CCTV component for structured cabling environments.

Specification

Electrical
Input Voltage	110 VAC or 220 VAC, externally switch selectable
Input Current	4.8 A (110 VAC) / 2.4 A (220 VAC)
Camera Power	Voltage: Isolated class II, 24 VAC, off, 28 VAC Rear panel switch selectable Current: 1 A maximum per camera, Total power: 340 VA
Fault Protection	2 A glass fuse (front access) per camera
Video Format	NTSC, PAL, SECAM
Frequency	20 Hz to 10 MHz
CMRR	60 dB
Twisted Pair (UTP)	100 Ohms +/- 20%, 24 AWG minimum, Category 2-7
Diagnostics LEDs	No load or shut down: 16 red LEDs, one per channel Power present: 16 green LEDs, one per channel
Connectors	Camera connection: RJ-45 connector Data: RJ-45 connector Control room video: BNC
Transient Immunity	per ANSI 587 C62.41
Environmental
Humidity	0 to 95%, non-condensing
Temperature	Operating: -20°C to +50°C Storage: -30°C to +70°C
Minimum Airflow	3 cft./min
Heat	1300 BTU/hour
Mechanical
Dimensions	1.75x17x12 in., 4.3x43x30.5 cm (HxWxL)
Weight	22 lb, 10 kg
Material	Steel sheet metal
Included Accessories
Rubber feet for desk applications 16 2-ft. (60 cm) coax jumper cables Moulded IEC 7-ft. (200 cm) power cord
*Specifications subject to change without notice.