Vi2601

Features

High power Midspan with built-in Ethernet extender for long-distance Coax Cables
MegaPixel Certified (MPC™), ideal for high bandwidth requirements of MegaPixel cameras
Built-in power supply provides PoE power up to 30W
In-rush current sensing prevents shut down during camera events such as start-up, day/night, auto back focus heater and blower turn on, and PTZ operation
LED Indicator provides PoE power status
Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards.
Saves time and installation costs by using existing coax cable
Tested and approved for high bandwidth transmission including 4KUHD cameras
Complies to major IEEE standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPS

Overview

MaxiiPower™ Vi2601 extended Coax Midspan is designed to meet the most demanding IP camera data and PoE requirements at extended distances. It can provide full IEE 802.3af and 8IEE 02.3at up to 30W at extended distances over Coax using Vigitron's unique Symmetric Bandwidth (SBW™) technology. The transmission data rate is automatically set to 10 or 100Mbps depending on the distance.

It is fully transparent to any standard Ethernet network and higher-layer protocols and requires no IP setting or configurations. The combined Ethernet extender technology and PoE Midspan simplify the installation and lower the cost of the system by eliminating the need for standard PoE midspans with far limited PoE power and protection capability.

The Vi2601 provides an LED to indicate power and transmission status. It operates in auto mode with no programming required.

It is ideal for a wide range of CCTV and IT applications that require high power such as IP cameras, wireless access points or VoIP installed at extended distances.

Specification

Electrical
Ethernet Interface	Standard 10/100BaseT
Coax	RG59 (or higher quality)
Ethernet Rate	10/100Mbps, Auto-select Full speed / Full duplex at max. rated distance
Power Output	56VDC, 30W
AC Input Power	100-240VAC, 50-60Hz, 0.5A max.
PoE Standard	IEEE 802.3af PoE, IEEE 802.3at PoE
Status LEDs	PoE: Green
Data Interfaces &	RFC 768 UDP, RFC 2068 HTTP
Compliances	RFC 793 TCP, RFC 791 IP RFC 1783 TFTP, RFC 894 IP over Ethernet RFC 2544 TCP/IP Packet Transmission
Connectors	Ethernet Input Interface: Shielded RJ45 Extended Output Interface: Female BNC Main Power: IEC 320-C14 Inlet
Regulatory
Safety	CE
FCC	Part 15, Subpart B, Class B 2010
Emission Standards:	EN 55022:206+A1:2007 EN61000-3-2:2006+A1:2009+A2:2009 EN 61000-3-3:2008 EN55024:1998+A1:2001+A2:2003
Environmental	RoHS, WEEE
Environmental
Humidity	0 to 90%, Non-condensing
Temperature	Operating: -10°C to +50°C Storage: -40°C to +80°C
Mechanical
Dimensions	1.78x2.54x4.95 in., 4.52x6.45x12.57 cm (HxWxL)
Weight	0.71 lb, 321 g
Material	Extruded Aluminum
Included Accessories
Molded IEC 7 ft. (200 cm) power cord
*Specifications subject to change without notice.

Downloads

Vi2601 Data Sheet
Vi2601 User Manual
Vi2601 A&E Specification
Vi2601 Application Drawing
Vi2601 Product Drawing

Ordering Information

Vi2400A Single port Mini Coax Ethernet Extender
Vi2400WP Weatherproof IP67 Ethernet over Coax
Vi2401A Single port Coax Ethernet Extender
Vi2404A 4-port Coax Ethernet Extender
Vi2408A 8-port Coax Ethernet Extende
Vi2416A 16-port Coax Ethernet Extender
Vi2601 1-port Extended Coax Midspan
Vi2616 16-port Extended Coax Midspan