Vi22101

Features

Separates PoE from Ethernet
Convert IEEE 802.3at PoE power to 12VDC
Compatible with all IEEE 802.3af/at PoE sources
Pass through data for device IP control and monitor

Overview

The Vi22101 is a PoE splitter that is fully compliant with IEEE 802.3af PoE standards. When used with a PoE switch or PoE Midspan, it separates PoE from Ethernet data and regulates the PoE high voltage to 12VDC.

It is designed to power Non-PoE IP devices and can provide 12VDC at up to 13W. The output voltage is selected by a slide switch. The Vi22101 is equipped with over-current protection to safeguard connected devices and can operate at an extended temperature of -40°C to +85°C. It is cost-effective and compact in size and fits easily in most camera housings.

The Vi22101 is an ideal solution that provides remote power to non-PoE IP devices to save installation time and cost.

Specification

Electrical
Ethernet Interface	Standard 10/100Mbps
Data Rate	Auto select 10/100Mbps Full speed / Full duplex
Power Consumption	Based on input power
Power Input	IEEE 802.3af, 15.4W
Power Output	12V DC @ 1 amp
Connections	Input Power and Data: RJ45 Power Out: Push Connector Data: RJ45
Status LEDs	PoE: Red 12VDC Output Available: Green
Data Interfaces and	RFC 768 UDP, RFC 2068 HTTP
Compliances	RFC 793 TCP, RFC 791 IP RFC 1783 TFTP, RFC 894 IP over Ethernet RFC 2544 TCP/IP Packet Transmission
PoE Compatibility	IEEE 802.3af / Class 0,1,2,3
Regulatory
Safety	CE
Environmental	RoHS, WEEE
Environmental
Humidity	0 to 95%, non-condensing
Temperature	Operating: -40°C to +85°C Storage: -65°C to +150°C
Mechanical
Dimensions	1.36x2.13x2.91 in., 34.5x54.1x73.9 cm (HxWxL)
Weight	0.25 lb, 115 g
Material	Extruded Aluminum
Accessories
Mounting clips
Din rail adapter
*Specifications subject to change without notice.